Home »
Tips & Tricks
» Laying instructions coarse sisal
Laying instructions coarse sisal
Step 1Put both widths with enough over-mesure against each other. |
![]() |
Step 2Meticulously cut along a warp thread. |
![]() |
Step 3Pull out about 6 cm warps threads from the carpet. |
![]() |
Step 4All weft threads are open now. |
![]() |
Step 5Only cut away the weft threads (3 over 1) that do not run over the warp threads.See image (these are the threads that pass through under the loop). |
![]() |
Step 6Fold down the remaining weft threads and glue them to the backing. |
![]() |
Step 7Glue both widths together. |
|